MSDR30/60

Info

• Un-winder

  

  Un-winder
  Model	MSDR-30	MSDR-60
  Chuck shaft dia. (inch)	3	3
  Max. roll weight (kg)	100	250
  Max. roll diameter (mm)	400	600
  Film splicer	Standard	Standard
  Tension setting (N)	10 ~ 60	15 ~ 100

  • Unwinding speed regulation
    The unwinding shaft detects the residual amount of material (web) and controls the feed amount and tension in conjunction with the winding shaft.
  • Web Guide Units
    Adjust the web to the printing position by the movement of the unwinding shaft (laterally slides) and the guide roller (tilts) according to the web edge sensor.
  • Delaminator [option]
    Peels the protective film while feeding the web. The web does not get damage since both work run at the same speed.
  • Static eliminator bar [option]
  • Dust Cleaning device [option]
• Re-winder

  

  • Winding speed regulation
    The shaft controls the winding amount and tension of material (web) in conjunction with the unwinding shaft.
  • Web Guide Unit
    Correct the web meandering by the movement of the winding shaft (laterally slides) and the guide roller (tilts) according to the web edge sensor.
  • Laminator [option]
    Attaches a film immediately after printing and drying process to protect the printed surface. The web does not get damage due to feeding in accordance with the winding tension.

  Re-winder
  Model	MSDR-30	MSDR-60
  Chuck shaft dia. (inch)	3	3
  Max. roll weight (kg)	100	250
  Max. roll diameter (mm)	400	600
  Tension setting (N)	10 ~ 60	10 ~ 70

• Hot Air Dryer (Vertical, Turn type)

  

  • Air turn bars enable to transport web without contacting the printed surface.
  • Space-saving achieved by vertical conveyance.
  • Input/output control via the operation panel at the printing section.

  Hot Air Dryer
  Model	MSDR-30	MSDR-60
  Thickness of material (um)	25 ~ 188	38 ~ 188
  Carrying Length in furnace (m)	Approx. 20	Approx. 30
  Atmosphere temp in furnace(deg C)	60 ~ 150	60 ~ 120

  * The specification given above is just one example. We will propose the most suitable ones depending on the purpose and requirements of the customer's work.
• UV curing device

  

  • Equipped with UV lamp x1 (high-pressure metal halide, height adjustable)
  • Input/output control via the operation panel at the printing section.

  UV Dryer
  Model	MSDR-30
  Thickness of material (um)	25 ~ 188
  UV lamp output (w/cm)	120
  Output regulation (mm)	400

  * The specification given above is just one example. We will propose the most suitable ones depending on the purpose and requirements of the customer's work.